- Our Price: Please call
- Description: Elvex chainsaw chaps meet the requirements of ASTM Standard for Leg Protection for Chain Saw Users (F-1897-98). This standard requires that the chaps can stop a chain saw running at 2,500 feet/minute under controlled laboratory conditions. (There are no longer two classes of chaps as previously required by the American Pulpwood Association Standard, APA 92-A-12.) The performance requirements remain unchanged at 2500 feet per minute chain speed, tested at both 45 degrees and 90 degrees to the longitudinal axis of the test sample. Compliance tests are performed by Underwriters Laboratories (UL) in accordance with ASTM F-1414, Measurement of Cut Resistance to Chain Saw Lower Body Protective Clothing.
- Details: Elvex ProChaps are available in the following lengths, 28", 33". 36" and 39". The length is measured from the belt to the bottom of the chap.
Elvex ProChaps use Prolar™ lightweight protective pads described below.
Elvex 90 series chainsaw chaps use a 420 denier Nylon cover
material, and have two sets of quick connect leg buckles.
Elvex 94 series chaps use 1,000 denier (Cordura) Nylon cover
material, and have three sets of quick connect leg straps and buckles.
Elvex 91 series chaps add wrap around protection around the calves.
Elvex ArborChaps™ is a chap designed for home owners. It meets the same performance requirements as our pro models, but does not come with a pocket. This model uses a hunter green 420 denier shell fabric, and has an adjustable length.
All Elvex ProChaps are equipped with a front zippered pocket
|
